| Standard-drills, Undercut-drills, Slot drills, diameters ≥ 0,05 mm (50 µm) |  |
Type
| Description | | Application | | SX35M | Bimetal drill with shank dia 3.175mm, dia range 0.10 to 0.50 mm | | Ideal for standard multilayers. Similar application than the UD40S, but for multilayers with lower % of copper or lower layer count. | | UX40S | Bimetal drill with special flute (undercut type) shank dia 3.175mm , dia range 0.10 to 0.45 mm | | High TG or polyimide multilayers with high layer counts. Will give good chip removal, extremely low drill breakage and will improve deflection value | | SX30E | Bimetal drill with shank dia 3.175mm , dia range 0.55 to 6.5 mm | | Ideal for standard PCB. Will give an excellent hole quality | | UX40E | Bimetal undercut drill with shank dia 3.175mm , dia range 0.55 to 0,8 mm with variable web | | This drill has a variable web to ease the chip removal and increase the accuracy. Same application than UX40S but with a diameter from 0,55mm | | UX42S | Bimetal undercut drill with shank dia 3.175mm , dia range 0.15 to 0,40 mm | | Ideal tool for small holes where chip removal and hole wall roughness are critical. Ideal also for halogen free materials and hard material. The chips are more "powderish" | | UX30E | Bimetal undercut drill with shank dia 3.175mm , dia range 0.55 to 6.5 mm | | Standard undercut type of drill bit but for large diameters. | | LX30S | Bimetal drill with shank dia 3.175mm , dia range 0.50 to 1,5 mm | | This is the right tool for manufacturing precise slots |
|
