Diamond patterned router, Chip breaker, Two flute endmill, V-groove cutter, scoring blades
|  |
| Type | Description | | Application | | DA30R | Standard fine diamond pattern router with 30°angle helix, right hand cutting and 3,175mm shank.
Dia range from 0,6 to 2,4 | | Standard router for FR4 or multilayer applications. Good compromise between quality, durability and productivity for FR4, High Tg and polyimide boards | | DA20R | Higher cutting speed router with 20° helix, right-hand cutting and 3,175mm shank. Dia range:1,2/1,5/1,6/2,0/ 2,4 mm | | This router allows to increase the table speed of at least 20% compared to DA30R. The roughness of cutting will not be as good as DA30R but the productivity higher on standard boards | | CA20R | It is a chip breaker router with 20°angle helix, right hand cutting and 3,175mm shank.
Dia range from 0,6 to 2,4 mm | | The roughness of cutting and the pcb quote tolerances will be excellent. This router is a good solution for rout panels after pressing. Also ideal for FR1, CEM1 and FR4 boards. | | EA30R | Two flute endmill router with a shank dia of 3,175 mm in a dia range of 0,3 to 3,175 mm | | The cutting quality is excellent. This router is a good solution for soft materials as PTFE, aramid and also flex. It is also a good solution for routing laminates on ground plates in alu, brass or copper. | | V | Tungsten carbide tools with a shank dia of 3,175 mm and a point angle of 30°, 45°, 60° and 90° | | Can be used on standard routing machine to make V-groove | | ZW | Tungsten carbide counter sink router special shape router, angle from 90° to 140°. | | To be used to chamfer laminates (no plain metal) | | EP30R | Array router diameter from 1,0 to 3,0mm. | | End milling |
|
