Electroactive powder and inks

Muster anfordern

Piezotech®, an Arkema Group company, proposes a unique range of electroactive polymers. With the help of R&D labs specialised in electroactive materials and client partners all around the world, Piezotech® is at origin of key achievements in the field of organic electronics and printed electronics.

Haben Sie eine Frage? Kontaktieren Sie uns

P(VDF-TrFE) copolymers powder

PIEZOTECH® FC COPOLYMERS are an excellent choice for sensors, energy harvesting, actuators, speakers and memories. They are very stable (resistance to moisture, and to temperatures up to 120 °C) and exhibit high sensitivity over a wide range of pressure (mPa to GPa) and frequency (mHz to GHz). They exhibit excellent mechanical properties (high elastic modulus and flexibility) and transparency.

Sensors fabricated from PIEZOTECH® FC copolymers enable the development of unique applications with detection through touch, deformation, ultrasounds, heat, impact, acoustic waves. Thanks to the piezoelectric effect, sensors do not require an external power source, strain is rapidly induced on these materials when exposed to an electric field. Actuator performance is enabled by their high energy density response, even at low electric fields (< 50 V.μm-1).

Product name Typical TrFE content (mol%) Curie Temperature (°C) Typical remnant polarization at 150 V/µm (mC/m²) Typical d33 (pC/N) PDF

Piezotech® FC20

20

136

85

-24 to -30

Piezotech® FC25

25

115

70

-24 to -30

Piezotech® FC30

30

100

65

-18 to -22

Piezotech® FC45

45

60

45

-18 to -22

Values given as indicative, not specifications.

P(VDF-TrFE-CTFE) or P(VDF-TrFE-CFE) Terpolymer Powders

P(VDF-TrFE-CTFE) or P(VDF-TrFE-CFE) are unique relaxor ferroelectric polymers that exhibit high electrostrictive strain and high dielectric constants.

  • High deformation (directly proportional to the applied electric field squared, E²)
  • High elastic energy
  • High stress
Product Name Termonomer Typical termonomer content (mol%) Typical melting point (°C) Typical relative dielectric constant (1 kHz) PDF

Piezotech® RT-TS

CTFE

Standard composition, please contact us

122

40

Piezotech® RT-FS

CFE

Standard composition, please contact us

127

55

Values given as indicative, not specifications.

Piezotech® FC Inks and RT inks

Solvents and concentrations have been optimized to allow for the use of standard printing conditions. 3 standard formulations (ink L, ink P, ink H) adapted to conventional techniques are available.

Standard Piezotech® FC Inks are formulated with Piezotech® FC20 polymer powder.

Standard Piezotech® RT Inks are formulated with Piezotech® RT-TS polymer powder.

Grade Technology Viscosity (mPa.s at 32°C) Thickness range (µm) Indicative dry content (wt%) PDF

Ink L

Spin-coating
Slot-die

<1000

0.1-2

7

Ink H

Spin-coating
Solvent-casting

1500-3000

Spin coat: 0.5-2
Solvent-cast: 2-80

20

Ink P

Screen-printing

15000-20000

1-10

17.5

Values given as indicative, not specifications.

Weitere Produkte und Informationen

Haben Sie eine Frage?

Wenn Sie Hilfe benötigen oder Fragen zu unserem Unternehmen oder unseren Produkten haben, zögern Sie bitte nicht, uns zu kontaktieren.

*“ zeigt erforderliche Felder an

Land*
Dieses Feld dient zur Validierung und sollte nicht verändert werden.